Bodha AI Route Planner

Vehicle Loading Plan

Every parcel in its place, found fast.

Bodha tells your driver exactly where each parcel is stowed in the van. Load in reverse delivery order, then find every package in one glance at every stop.

What is a Load Map, and what does it tell the driver?

A Load Map turns your optimized route into a loading plan. For each stop it shows a parcel count and one placement, made of Section (Front, Mid, Rear), Level (Floor, Shelf, Top, Roof), and Side (Left, Center, Right), plus an optional bin label. So a driver sees something like "3 parcels · Rear · Top · Left · Bin R3" before opening the cargo doors.

A place for every parcel, and a way to find it fast

Loaded without a plan

Distance52 mi
Drive time4h 05m
Late drops3
  • Drivers dig through the van at every single stop
  • Minutes lost per stop hunting for the right parcel
  • Wrong parcel grabbed, then a failed delivery
  • Where things are lives only in the driver's head
  • A fill-in driver has no idea what to grab

With Bodha's Vehicle Load Map

Distance41 mi-11 mi
Drive time3h 12m-53m
Late drops0-3
  • Bodha assigns each parcel a slot and guides the loading
  • Reverse delivery order, so the next parcel is always reachable
  • The placement is pinned right on the delivery screen
  • Counts and slots sync back to dispatch, not trapped in the cab
  • Any driver loads and runs the van correctly
Typical results

What teams see in the first month of planned van loading

Vans loaded in stop order mean faster drops and more stops per shift. Results vary by industry, vehicle, and route.

Start Free Route Optimization
Up to30%Fuel savings
$400+Saved monthly
20+More stops per day
1 HourLess driving time
  1. 01

    Guided Parcel Loader

    Load the van one parcel at a time

    Bodha turns the route into a loading plan and walks the driver parcel by parcel, so no one picks a slot from a blank grid.

    • Each parcel gets a concrete slot, like “Front · Shelf · Left”
    • Deliveries sorted into reverse-sequence load order automatically
    • Tap “Loaded” to confirm and auto-advance, or “Mark all loaded” to bulk fill
  2. 02

    Checked before you roll

    A place for every parcel, checked before you roll

    A fixed placement grid describes where each parcel sits, surfaces it on every screen, and checks the whole van is loaded before the route starts.

    • A fixed grid: Section, Level, Side, plus an optional bin like “Bin R3”, zero setup on any vehicle
    • “Mark missing” or “Put elsewhere” handle exceptions without silently skipping a stop
    • “Done loading” confirms every parcel is loaded or flagged, and dispatch sees any load exception
  3. 03

    Reverse Delivery Order

    Last stop loads first, first stop loads last

    Bodha sequences loading in reverse of the route, so the last stop sits deep by the cab and the first stop is at the rear door, ready to come out first.

    • Load order derived straight from the optimized route
    • First stop at the rear door, out first, no digging
    • Re-sequence the route and the load order re-derives to match
  4. 04

    Mirrored to Dispatch

    The van’s load, mirrored to the office

    The same placement data syncs back to the dispatcher web app, so counts and slots appear on stop cards and route detail.

    • Per-stop parcel count badges across route detail and stop cards
    • Placement shown on stops and in POD review, like “Pulled from Rear · Top · Left”
    • Syncs offline-first, so loading at a no-signal depot still reaches the office

Loved by delivery teams

Join 1,000+ businesses growing with Bodha.

Our drivers were carrying two devices to every stop: a phone for the route and a separate scanner for the parcels. I asked Bodha if they could build scanning straight into the app, and I figured it would go on a waiting list. Instead they had it done for us in a few weeks. Drivers just use the phone camera now: scan the parcel, done. We got rid of the old scanner hardware altogether, which saved us a good amount on its own.
DL

David L.

Dispatch Director, MetroExpress Delivery

The route adjusts on its own when things change. If a big order comes in late or the kitchen is running behind, Bodha reshuffles everything automatically. I don't have to call the driver or move deliveries around by hand, and customer notifications go out without anyone doing anything extra. Planning takes a fraction of the time, and each driver is getting through twice the drops they used to.
JD

Johnathan D.

Operations Manager, FreshBite Catering

The automated texts are what made the biggest difference for us. Customers get a message in the morning telling them roughly when the truck is coming, and the second the driver marks the pickup done they get a confirmation with a photo and timestamp. Before this we had no way to prove a pickup happened if a customer disputed it. Now it's all right there. Our support calls dropped massively, and the drivers don't have to explain themselves to dispatch anymore either.
MV

Marcus V.

Director of Operations, Coastal Waste Management

Solutions for every industry.

Bodha is tailored to the unique challenges of your business, whether you deliver food, parcels, or run field crews.

Frequently Asked Questions

Everything you need to know about Bodha.

What is a Load Map, and what does it tell the driver?

A Load Map turns your optimized route into a loading plan. For each stop it shows a parcel count and one placement, made of Section (Front, Mid, Rear), Level (Floor, Shelf, Top, Roof), and Side (Left, Center, Right), plus an optional bin label. So a driver sees something like "3 parcels · Rear · Top · Left · Bin R3" before opening the cargo doors.

What is LIFO load order and why does it matter?

LIFO load order means the van is loaded in reverse of the route: last stop first, first stop last. That way the first stop's parcels sit at the rear door and come out first, so the driver never digs through the van. It saves a few minutes at every stop and cuts the misdeliveries that happen when the wrong parcel is grabbed.

Does the driver have to figure out where to put each parcel?

No. Bodha assigns the slot and guides the driver parcel by parcel, with the target cell glowing on a van diagram. The driver never picks from a blank grid, they just follow along and tap loaded.

Does this work offline at the depot?

Yes. Placements and load status are saved on the device and synced back to the dispatcher web view later, even with no signal at the depot.

Where do parcel counts come from?

Parcel counts arrive with your stops through a mappable "Parcel Count" column in the spreadsheet import, and dispatchers can also edit counts on the web.

Still have questions?

Our team is here to help you find the right solution for your delivery needs.

Ready to optimize your delivery routes?

Join 1,000+ businesses already using Bodha’s delivery route planning software to save time and reduce operational costs.